SENSOR SUHU DAN KELEMBAPAN RUANGAN BERBASIS ARDUINO UNO

agung setiadi andara; Ragel Trisudarmo

Authors

agung setiadi andara Sistem Informasi, Fakultas Ilmu Komputer, Universitas Kuningan
Ragel Trisudarmo Sistem Informasi, Fakultas Ilmu Komputer, Universitas Kuningan https://orcid.org/0000-0002-5552-1773

Keywords:

DHT11, Arduino Uno, I2C LCD 16X2

Abstract

A temperature and humidity sensor is a tool used to monitor temperature and humidity conditions in a room or in certain places that require stable environmental conditions. Temperature and humidity sensors have many applications, for example in laboratory rooms, to regulate optimal temperature and humidity. Making this temperature and humidity sensor also designed a system that uses the DHT11 Sensor as the sensor to function as input, and the Arduino Uno Microcontroller system as the system center that runs the data received from the DHT11 Sensor, and a 16x2 LCD as the output which displays the results from the DHT11 Sensor. The results show that the DHT11 has input in the form of a temperature and humidity sensor. This sensor will detect the temperature and humidity in the room and display it on a 16x2 LCD. By using an "Arduino Uno Based Room Temperature and Humidity Sensor" monitoring of temperature and humidity in the room can be well controlled, so that various problems due to lack of temperature and humidity control can be avoided. Thus, this system is very efficient in monitoring temperature and humidity sensors indoors and outdoors.

References

B. Haryanto, N. Ismail, and E. J. Pristianto, “Sistem Monitoring Suhu dan Kelembapan Secara Nirkabel pada Budidaya Tanaman Hidroponik,” J. Teknol. Rekayasa, vol. 3, no. 1, p. 47, 2018, doi: 10.31544/jtera.v3.i1.2018.47-54.

G. Santoso et al., “Rancang Bangun Sistem Monitoring Suhu dan Kelembaban pada Ruang Server Berbasis IoT (Internet of Things) Vol. 11 No. 2 Februari 2019 ISSN: 1979-8415,” J. Teknol. Technoscientia, vol. 11, no. 2, pp. 186–193, 2019.

Lutfiyana, N. Hudallah, and A. Suryanto, “Rancang Bangun Alat Ukur Suhu Tanah , Kelembaban Tanah, dan Resistansi,” Tek. Elektro, vol. 9, no. 2, pp. 80–86, 2017.

A. Najmurrokhman, “Cold Storage Menggunakan Mikrokontroler,” J. Teknol., vol. 10, no. 1, pp. 73–82, 2018.

R. A. Wijaya, S. W. L. W. Lestari, and M. Mardiono, “Rancang Bangun Alat Monitoring Suhu dan Kelembaban Pada Alat Baby Incubator Berbasis Internet Of Things,” J. Teknol., vol. 6, no. 1, p. 52, 2019, doi: 10.31479/jtek.v6i1.5.

F. Susanto, N. K. Prasiani, and P. Darmawan, “Implementasi Internet of Things Dalam Kehidupan Sehari-Hari,” J. Imagine, vol. 2, no. 1, pp. 35–40, 2022, doi: 10.35886/imagine.v2i1.329.

M. I. Zarkasi, J. Endri, and S. Sarjana, “Rancang Bangun Pengatur Suhu Dan Kelembaban Ruang Server Berbasis IoT,” J-SAKTI (Jurnal Sains Komput. dan Inform., vol. 3, no. 2, p. 178, 2019, doi: 10.30645/j-sakti.v3i2.138.